Motor Drives

dc-5v-4-phase-5-wire-stepper-motor-with-uln200 250.00

28YBJ-48 DC 5V 4 Phase 5 Wire Stepper Motor With ULN2003 Drive in Pakistan

0 out of 5
(0)
SKU: N/A

dc-5v-4-phase-5-wire-stepper-motor-with-uln200

Add to cart
IBT-2 H-Bridge with Arduino 1,400.00

43A H Bridge Drive PWM BTS7960B IBT2 in Pakistan

0 out of 5
(0)
SKU: N/AAdd to cart
A3967-Stepper-Motor-Driver-Board 230.00

A3967 Stepper Motor Easy Driver Board in Pakistan

0 out of 5
(0)
SKU: N/A

EasyDriver Shield Stepper Motor Driver A3967

Add to cart
a4988-stepper-motor-driver 140.00 150.00

A4988 Stepper Motor Driver in Pakistan

0 out of 5
(0)
SKU: N/A
  • Adjustable Current Limit

  • Over Current Protection

  • Over Temperature Protection

  • Operating Voltage from 8V to 35V

  • Operating Current 2A

Add to cart
16-Channel-12-bit-PWM-Servo-Driver-I2C-interface-PCA9685-for-Arduino-Raspberry-Pi-Servo 500.00

Adafruit 16 Channel 12 bit PWM Servo Driver I2C interface PCA9685 in Pakistan

0 out of 5
(0)
SKU: N/A

Adafruit 16-Channel 12-bit PWM/Servo Driver – I2C interface – PCA9685

Add to cart
DRV8825-Stepper-Motor-Driver-in-Pakistan 180.00

DRV8825 Stepper Motor Driver in Pakistan

0 out of 5
(0)
SKU: N/A

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.

The module has a pin-out and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.

The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six micro step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).

Add to cart
l293d-h-bridge-stepper-motor-driver 75.00

L293D H Bridge Motor Driver in Pakistan

0 out of 5
(0)
SKU: N/A

L293D H-Bridge Stepper Motor Driver

Add to cart
L293d-Motor-Driver-shield-for-arduino 270.00

L293D Motor Driver Shield in Pakistan

0 out of 5
(0)
SKU: N/A

This L293D motor driver is a 4-channel driver with an Arduino shield form factor. This is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepper motors. It lets you drive 2 Stepper motor or 4 DC motors with an Arduino, controlling the speed and direction of each one independently.

Add to cart
H-Bridge-L298 MODULE-Motor-Drive 200.00

L298 H Bridge Motor Driver Module in Pakistan

0 out of 5
(0)
SKU: N/A

This module is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently control two motors of up to 2A each in both directions.

It is ideal for robotic applications and well suited for connection to a micro-controller requiring just a couple of control lines per motor. It can also be interfaced with simple manual switches, TTL logic gates, relays, etc.

Add to cart
mach3-motor-driver-module 600.00

Mach3 Breakout Board 5 Axes CNC Breakout Board With Optical Coupler For MACH3 Stepper Motor Drive

0 out of 5
(0)
SKU: N/A

MACH3 Interface Board CNC 5 Axis With Optocoupler Adapter Stepper Motor Driver

Add to cart
Mini-DC-Motor-PWM-Governor-3V6-12-24-35V-Speed-Switch-Ultra-Small-LED-Dimmer 270.00 300.00

Mini DC motor PWM governor in Pakistan

0 out of 5
(0)
SKU: N/A

DC motor PWM governor 3V6 12 24 35V speed control ultra-small LED dimmer 5A (C6A4)

Add to cart
monster-motor-controller-shield-arduino-large 920.00

Monster Motor Controller Shield 14A, 5.5-16V

0 out of 5
(0)
SKU: N/A

 Maximum current rating: 30A
 Maximum voltage: 16V
 MOSFET on-resistance: 19mOhm (per leg)
 Maximum PWM frequency: 20kHz
 Undervoltage and overvoltage shutdown

Add to cart
tb6560-stepper-motor-driver-3A 649.00

TB6560 3A CNC Router 1 Axis Driver Board Stepper Motor Drivers in Pakistan

0 out of 5
(0)
SKU: N/A

Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and over current protection circuit to ensure optimal performance.
For two-phase within 42, 57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable for more than 3A stepper motor.
Automatic half current function.
6N137 high-speed optical coupling, guarantee high speed without losing step.

Add to cart
tb6600-stepper-motor-driver-4.5A 900.00

TB6600 4.5A Hybrid Stepper Motor Driver in Pakistan

0 out of 5
(0)
SKU: N/A

Stepper Motor Driver TB6600

1) Working voltage DC 10V-45V. Recommend the use of switching power supply DC32V.

2) The use of high-speed optical coupling 6N137, ensuring high speed without losing step.

3) The use of Toshiba’s new high-current, high-voltage TB6600HG new original chip, there are low-pressure          shut-off, overheating parking and over-current protection circuit, short circuit protection and increased              compared to TB6560.

4) The maximum rated output reaches: ± 4.5A.

5) for less than 4.2A 42,57,86 two-phase / four-phase / four-wire / six wire stepper motor.

 

Add to cart
TB6600-stepper-motor-driver-arduino 1,250.00

TB6600 Stepper Motor Driver in Pakistan

0 out of 5
(0)
SKU: N/A

For two-phase stepper motors
Arduino compatible
Able to output a 4A peak current
8 kinds of current control from 0.5A to 3.5A and 7 kinds of micro steps
Power input from 9 to 42VDC

Add to cart
thyristor-drive-MOC3021-MOC3020-in-Pakistan 20.00

Thyristor Driver MOC3021/3020 in Pakistan

0 out of 5
(0)
SKU: N/A

The MOC3021/3020 Series consists of Gallium Arsenide infrared emitting diodes, optically coupled to a silicon bilateral switch. To order devices that are tested and marked per VDE 0884 requirements, the suffix ”V” must be included at end of part number. VDE 0884 is a test option. They are designed for applications requiring isolated triac triggering.

Add to cart
ULN2003-IC-stepper-motor-drive 20.00

ULN2003 IC DIP Stepper Motor Drive in Pakistan

0 out of 5
(0)
SKU: N/A

ULN2003 IC Stepper Motor Drive

Original Product

Add to cart
uln2803-ic-in-Pakistan 25.00

ULN2803 IC in Pakistan

0 out of 5
(0)
SKU: N/A

This DIP chip contains 8 drivers that can sink 500mA from a 50V supply and has kickback diodes included inside for driving coils. This will let your little microcontroller or microcomputer power solenoids, DC motors (in one direction) and unipolar stepper motors.

Add to cart
dc-5v-4-phase-5-wire-stepper-motor-with-uln200
250.00 Add to cart
A3967-Stepper-Motor-Driver-Board

A3967 Stepper Motor Easy Driver Board in Pakistan

0 out of 5
(0)

EasyDriver Shield Stepper Motor Driver A3967

SKU: N/A
230.00 Add to cart
a4988-stepper-motor-driver

A4988 Stepper Motor Driver in Pakistan

0 out of 5
(0)
  • Adjustable Current Limit

  • Over Current Protection

  • Over Temperature Protection

  • Operating Voltage from 8V to 35V

  • Operating Current 2A

SKU: N/A
140.00 150.00 Add to cart
16-Channel-12-bit-PWM-Servo-Driver-I2C-interface-PCA9685-for-Arduino-Raspberry-Pi-Servo

Adafruit 16 Channel 12 bit PWM Servo Driver I2C interface PCA9685 in Pakistan

0 out of 5
(0)

Adafruit 16-Channel 12-bit PWM/Servo Driver – I2C interface – PCA9685

SKU: N/A
Availability:

8 in stock

500.00 Add to cart
DRV8825-Stepper-Motor-Driver-in-Pakistan

DRV8825 Stepper Motor Driver in Pakistan

0 out of 5
(0)

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.

The module has a pin-out and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.

The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six micro step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).

SKU: N/A
180.00 Add to cart
l293d-h-bridge-stepper-motor-driver

L293D H Bridge Motor Driver in Pakistan

0 out of 5
(0)

L293D H-Bridge Stepper Motor Driver

SKU: N/A
75.00 Add to cart
L293d-Motor-Driver-shield-for-arduino

L293D Motor Driver Shield in Pakistan

0 out of 5
(0)

This L293D motor driver is a 4-channel driver with an Arduino shield form factor. This is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepper motors. It lets you drive 2 Stepper motor or 4 DC motors with an Arduino, controlling the speed and direction of each one independently.

SKU: N/A
270.00 Add to cart
H-Bridge-L298 MODULE-Motor-Drive

L298 H Bridge Motor Driver Module in Pakistan

0 out of 5
(0)

This module is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently control two motors of up to 2A each in both directions.

It is ideal for robotic applications and well suited for connection to a micro-controller requiring just a couple of control lines per motor. It can also be interfaced with simple manual switches, TTL logic gates, relays, etc.

SKU: N/A
200.00 Add to cart
mach3-motor-driver-module

Mach3 Breakout Board 5 Axes CNC Breakout Board With Optical Coupler For MACH3 Stepper Motor Drive

0 out of 5
(0)

MACH3 Interface Board CNC 5 Axis With Optocoupler Adapter Stepper Motor Driver

SKU: N/A
600.00 Add to cart
Mini-DC-Motor-PWM-Governor-3V6-12-24-35V-Speed-Switch-Ultra-Small-LED-Dimmer

Mini DC motor PWM governor in Pakistan

0 out of 5
(0)

DC motor PWM governor 3V6 12 24 35V speed control ultra-small LED dimmer 5A (C6A4)

SKU: N/A
270.00 300.00 Add to cart
monster-motor-controller-shield-arduino-large

Monster Motor Controller Shield 14A, 5.5-16V

0 out of 5
(0)

 Maximum current rating: 30A
 Maximum voltage: 16V
 MOSFET on-resistance: 19mOhm (per leg)
 Maximum PWM frequency: 20kHz
 Undervoltage and overvoltage shutdown

SKU: N/A
920.00 Add to cart
tb6560-stepper-motor-driver-3A

TB6560 3A CNC Router 1 Axis Driver Board Stepper Motor Drivers in Pakistan

0 out of 5
(0)

Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and over current protection circuit to ensure optimal performance.
For two-phase within 42, 57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable for more than 3A stepper motor.
Automatic half current function.
6N137 high-speed optical coupling, guarantee high speed without losing step.

SKU: N/A
649.00 Add to cart
tb6600-stepper-motor-driver-4.5A

TB6600 4.5A Hybrid Stepper Motor Driver in Pakistan

0 out of 5
(0)

Stepper Motor Driver TB6600

1) Working voltage DC 10V-45V. Recommend the use of switching power supply DC32V.

2) The use of high-speed optical coupling 6N137, ensuring high speed without losing step.

3) The use of Toshiba’s new high-current, high-voltage TB6600HG new original chip, there are low-pressure          shut-off, overheating parking and over-current protection circuit, short circuit protection and increased              compared to TB6560.

4) The maximum rated output reaches: ± 4.5A.

5) for less than 4.2A 42,57,86 two-phase / four-phase / four-wire / six wire stepper motor.

 

SKU: N/A
900.00 Add to cart
TB6600-stepper-motor-driver-arduino

TB6600 Stepper Motor Driver in Pakistan

0 out of 5
(0)

For two-phase stepper motors
Arduino compatible
Able to output a 4A peak current
8 kinds of current control from 0.5A to 3.5A and 7 kinds of micro steps
Power input from 9 to 42VDC

SKU: N/A
1,250.00 Add to cart
thyristor-drive-MOC3021-MOC3020-in-Pakistan

Thyristor Driver MOC3021/3020 in Pakistan

0 out of 5
(0)

The MOC3021/3020 Series consists of Gallium Arsenide infrared emitting diodes, optically coupled to a silicon bilateral switch. To order devices that are tested and marked per VDE 0884 requirements, the suffix ”V” must be included at end of part number. VDE 0884 is a test option. They are designed for applications requiring isolated triac triggering.

SKU: N/A
20.00 Add to cart
ULN2003-IC-stepper-motor-drive

ULN2003 IC DIP Stepper Motor Drive in Pakistan

0 out of 5
(0)

ULN2003 IC Stepper Motor Drive

Original Product

SKU: N/A
20.00 Add to cart
uln2803-ic-in-Pakistan

ULN2803 IC in Pakistan

0 out of 5
(0)

This DIP chip contains 8 drivers that can sink 500mA from a 50V supply and has kickback diodes included inside for driving coils. This will let your little microcontroller or microcomputer power solenoids, DC motors (in one direction) and unipolar stepper motors.

SKU: N/A
25.00 Add to cart
A3967-Stepper-Motor-Driver-Board

A3967 Stepper Motor Easy Driver Board in Pakistan

0 out of 5
(0)

EasyDriver Shield Stepper Motor Driver A3967

230.00 Add to cart
a4988-stepper-motor-driver

A4988 Stepper Motor Driver in Pakistan

0 out of 5
(0)
  • Adjustable Current Limit

  • Over Current Protection

  • Over Temperature Protection

  • Operating Voltage from 8V to 35V

  • Operating Current 2A

140.00 150.00 Add to cart
16-Channel-12-bit-PWM-Servo-Driver-I2C-interface-PCA9685-for-Arduino-Raspberry-Pi-Servo

Adafruit 16 Channel 12 bit PWM Servo Driver I2C interface PCA9685 in Pakistan

0 out of 5
(0)

Adafruit 16-Channel 12-bit PWM/Servo Driver – I2C interface – PCA9685

Availability:

8 in stock

500.00 Add to cart
DRV8825-Stepper-Motor-Driver-in-Pakistan

DRV8825 Stepper Motor Driver in Pakistan

0 out of 5
(0)

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.

The module has a pin-out and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.

The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six micro step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).

180.00 Add to cart
l293d-h-bridge-stepper-motor-driver
75.00 Add to cart
L293d-Motor-Driver-shield-for-arduino

L293D Motor Driver Shield in Pakistan

0 out of 5
(0)

This L293D motor driver is a 4-channel driver with an Arduino shield form factor. This is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepper motors. It lets you drive 2 Stepper motor or 4 DC motors with an Arduino, controlling the speed and direction of each one independently.

270.00 Add to cart
H-Bridge-L298 MODULE-Motor-Drive

L298 H Bridge Motor Driver Module in Pakistan

0 out of 5
(0)

This module is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently control two motors of up to 2A each in both directions.

It is ideal for robotic applications and well suited for connection to a micro-controller requiring just a couple of control lines per motor. It can also be interfaced with simple manual switches, TTL logic gates, relays, etc.

200.00 Add to cart
mach3-motor-driver-module

Mach3 Breakout Board 5 Axes CNC Breakout Board With Optical Coupler For MACH3 Stepper Motor Drive

0 out of 5
(0)

MACH3 Interface Board CNC 5 Axis With Optocoupler Adapter Stepper Motor Driver

600.00 Add to cart
Mini-DC-Motor-PWM-Governor-3V6-12-24-35V-Speed-Switch-Ultra-Small-LED-Dimmer

Mini DC motor PWM governor in Pakistan

0 out of 5
(0)

DC motor PWM governor 3V6 12 24 35V speed control ultra-small LED dimmer 5A (C6A4)

270.00 300.00 Add to cart
monster-motor-controller-shield-arduino-large

Monster Motor Controller Shield 14A, 5.5-16V

0 out of 5
(0)

 Maximum current rating: 30A
 Maximum voltage: 16V
 MOSFET on-resistance: 19mOhm (per leg)
 Maximum PWM frequency: 20kHz
 Undervoltage and overvoltage shutdown

920.00 Add to cart
tb6560-stepper-motor-driver-3A

TB6560 3A CNC Router 1 Axis Driver Board Stepper Motor Drivers in Pakistan

0 out of 5
(0)

Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and over current protection circuit to ensure optimal performance.
For two-phase within 42, 57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable for more than 3A stepper motor.
Automatic half current function.
6N137 high-speed optical coupling, guarantee high speed without losing step.

649.00 Add to cart
tb6600-stepper-motor-driver-4.5A

TB6600 4.5A Hybrid Stepper Motor Driver in Pakistan

0 out of 5
(0)

Stepper Motor Driver TB6600

1) Working voltage DC 10V-45V. Recommend the use of switching power supply DC32V.

2) The use of high-speed optical coupling 6N137, ensuring high speed without losing step.

3) The use of Toshiba’s new high-current, high-voltage TB6600HG new original chip, there are low-pressure          shut-off, overheating parking and over-current protection circuit, short circuit protection and increased              compared to TB6560.

4) The maximum rated output reaches: ± 4.5A.

5) for less than 4.2A 42,57,86 two-phase / four-phase / four-wire / six wire stepper motor.

 

900.00 Add to cart
TB6600-stepper-motor-driver-arduino

TB6600 Stepper Motor Driver in Pakistan

0 out of 5
(0)

For two-phase stepper motors
Arduino compatible
Able to output a 4A peak current
8 kinds of current control from 0.5A to 3.5A and 7 kinds of micro steps
Power input from 9 to 42VDC

1,250.00 Add to cart
thyristor-drive-MOC3021-MOC3020-in-Pakistan

Thyristor Driver MOC3021/3020 in Pakistan

0 out of 5
(0)

The MOC3021/3020 Series consists of Gallium Arsenide infrared emitting diodes, optically coupled to a silicon bilateral switch. To order devices that are tested and marked per VDE 0884 requirements, the suffix ”V” must be included at end of part number. VDE 0884 is a test option. They are designed for applications requiring isolated triac triggering.

20.00 Add to cart
ULN2003-IC-stepper-motor-drive

ULN2003 IC DIP Stepper Motor Drive in Pakistan

0 out of 5
(0)

ULN2003 IC Stepper Motor Drive

Original Product

20.00 Add to cart
uln2803-ic-in-Pakistan

ULN2803 IC in Pakistan

0 out of 5
(0)

This DIP chip contains 8 drivers that can sink 500mA from a 50V supply and has kickback diodes included inside for driving coils. This will let your little microcontroller or microcomputer power solenoids, DC motors (in one direction) and unipolar stepper motors.

25.00 Add to cart
A3967-Stepper-Motor-Driver-Board

A3967 Stepper Motor Easy Driver Board in Pakistan

0 out of 5
(0)

EasyDriver Shield Stepper Motor Driver A3967

230.00 Add to cart
a4988-stepper-motor-driver

A4988 Stepper Motor Driver in Pakistan

0 out of 5
(0)
  • Adjustable Current Limit

  • Over Current Protection

  • Over Temperature Protection

  • Operating Voltage from 8V to 35V

  • Operating Current 2A

140.00 150.00 Add to cart
16-Channel-12-bit-PWM-Servo-Driver-I2C-interface-PCA9685-for-Arduino-Raspberry-Pi-Servo

Adafruit 16 Channel 12 bit PWM Servo Driver I2C interface PCA9685 in Pakistan

0 out of 5
(0)

Adafruit 16-Channel 12-bit PWM/Servo Driver – I2C interface – PCA9685

500.00 Add to cart
DRV8825-Stepper-Motor-Driver-in-Pakistan

DRV8825 Stepper Motor Driver in Pakistan

0 out of 5
(0)

The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver.

The module has a pin-out and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.

The DRV8825 features adjustable current limiting, over-current and over-temperature protection, and six micro step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).

180.00 Add to cart
l293d-h-bridge-stepper-motor-driver
75.00 Add to cart
L293d-Motor-Driver-shield-for-arduino

L293D Motor Driver Shield in Pakistan

0 out of 5
(0)

This L293D motor driver is a 4-channel driver with an Arduino shield form factor. This is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepper motors. It lets you drive 2 Stepper motor or 4 DC motors with an Arduino, controlling the speed and direction of each one independently.

270.00 Add to cart
H-Bridge-L298 MODULE-Motor-Drive

L298 H Bridge Motor Driver Module in Pakistan

0 out of 5
(0)

This module is based on the very popular L298 Dual H-Bridge Motor Driver Integrated Circuit. The circuit will allow you to easily and independently control two motors of up to 2A each in both directions.

It is ideal for robotic applications and well suited for connection to a micro-controller requiring just a couple of control lines per motor. It can also be interfaced with simple manual switches, TTL logic gates, relays, etc.

200.00 Add to cart
mach3-motor-driver-module

Mach3 Breakout Board 5 Axes CNC Breakout Board With Optical Coupler For MACH3 Stepper Motor Drive

0 out of 5
(0)

MACH3 Interface Board CNC 5 Axis With Optocoupler Adapter Stepper Motor Driver

600.00 Add to cart
Mini-DC-Motor-PWM-Governor-3V6-12-24-35V-Speed-Switch-Ultra-Small-LED-Dimmer

Mini DC motor PWM governor in Pakistan

0 out of 5
(0)

DC motor PWM governor 3V6 12 24 35V speed control ultra-small LED dimmer 5A (C6A4)

270.00 300.00 Add to cart
monster-motor-controller-shield-arduino-large

Monster Motor Controller Shield 14A, 5.5-16V

0 out of 5
(0)

 Maximum current rating: 30A
 Maximum voltage: 16V
 MOSFET on-resistance: 19mOhm (per leg)
 Maximum PWM frequency: 20kHz
 Undervoltage and overvoltage shutdown

920.00 Add to cart
tb6560-stepper-motor-driver-3A

TB6560 3A CNC Router 1 Axis Driver Board Stepper Motor Drivers in Pakistan

0 out of 5
(0)

Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and over current protection circuit to ensure optimal performance.
For two-phase within 42, 57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable for more than 3A stepper motor.
Automatic half current function.
6N137 high-speed optical coupling, guarantee high speed without losing step.

649.00 Add to cart
tb6600-stepper-motor-driver-4.5A

TB6600 4.5A Hybrid Stepper Motor Driver in Pakistan

0 out of 5
(0)

Stepper Motor Driver TB6600

1) Working voltage DC 10V-45V. Recommend the use of switching power supply DC32V.

2) The use of high-speed optical coupling 6N137, ensuring high speed without losing step.

3) The use of Toshiba’s new high-current, high-voltage TB6600HG new original chip, there are low-pressure          shut-off, overheating parking and over-current protection circuit, short circuit protection and increased              compared to TB6560.

4) The maximum rated output reaches: ± 4.5A.

5) for less than 4.2A 42,57,86 two-phase / four-phase / four-wire / six wire stepper motor.

 

900.00 Add to cart
TB6600-stepper-motor-driver-arduino

TB6600 Stepper Motor Driver in Pakistan

0 out of 5
(0)

For two-phase stepper motors
Arduino compatible
Able to output a 4A peak current
8 kinds of current control from 0.5A to 3.5A and 7 kinds of micro steps
Power input from 9 to 42VDC

1,250.00 Add to cart
thyristor-drive-MOC3021-MOC3020-in-Pakistan

Thyristor Driver MOC3021/3020 in Pakistan

0 out of 5
(0)

The MOC3021/3020 Series consists of Gallium Arsenide infrared emitting diodes, optically coupled to a silicon bilateral switch. To order devices that are tested and marked per VDE 0884 requirements, the suffix ”V” must be included at end of part number. VDE 0884 is a test option. They are designed for applications requiring isolated triac triggering.

20.00 Add to cart
ULN2003-IC-stepper-motor-drive

ULN2003 IC DIP Stepper Motor Drive in Pakistan

0 out of 5
(0)

ULN2003 IC Stepper Motor Drive

Original Product

20.00 Add to cart
uln2803-ic-in-Pakistan

ULN2803 IC in Pakistan

0 out of 5
(0)

This DIP chip contains 8 drivers that can sink 500mA from a 50V supply and has kickback diodes included inside for driving coils. This will let your little microcontroller or microcomputer power solenoids, DC motors (in one direction) and unipolar stepper motors.

25.00 Add to cart

Showing all 18 results